火凤皇气动点焊机，金属线点焊机，网片焊机，单点式焊机

气动点焊机机器性能及特点：pneumatic spot welding machine performance and features:

本产品为交流熔接焊机，精准控制系统能满足客户随意调节。双电流，双脚踏开关，不用调节可在一台机上完成两种产品焊接，焊机元器件均采用日本先进产品，气缸运动部位皆千锤百炼，异常灵活，无虚位产生，焊机变压器采用环氧树脂浇注，次级紫铜精加工，内部强制通水冷却，功率输出强劲，使用寿命长，故障率极低。

this product is for the exchange of weld welder, precise control of the system can be adjusted to meet customer. double the current, dual footswitch, do not adjust the two products can be completed on a welding machine, welding components are used in japan advanced products, cylinder moving parts are tempered, very flexible, no dummy bit generation, welding transformer ring epoxy resin casting, secondary copper finishing, internal forced water cooling, power output strong, long life, low failure rate.

1、焊机采用日本黑田精工气阀、空气过滤器，主导轴及导向轴采用镀铬光圆，并装有标准含油轴套，无需注油，可延长轴和轴套的使用寿命，使气缸动作灵活，无虚位产生。

1, welding machine adopts japan kuroda seiko valve, air filter, the capstan and the guide shaft chrome light round, and e with a standard oil-bearing bushings, no oiling, extend the service life of the shaft and sleeve, the cylinder action flexible, non-generated virtual spaces.

2、焊机变压器采用环氧树脂浇注，次级采用整体紫铜件精加工而成，不会热变形，内部通水强制冷却，空载损耗低，功率输出强劲，使用寿命长。

2, welding transformer uses epoxy resin casting, secondary copper pieces with the overall finished form, will not heat deformation inside pass water forced cooling, low no-load loss, power output strong, long service life.

3、焊接控制器采用单片机集成控制，各组控制参数圴能通过进口数码按键任意调节，并具有一机两组控制参数，双电流、双脚踏开关，可在一台机器上不用调节可完成两种规格产品的焊接。

3, welding controller uses a single-chip integrated control, each set of control parameters can import digital keys zhuo be adjusted, and a machine has two control parameters, double the current, dual foot switch, on a single machine without adjustment to be completed welding two specifications of the product.

4、本系列产品速度快，生产效率高，一般应用在铁线网类制品的点（排）焊上更能突出焊机的特点：快速、稳定。

4, the product speed, high production efficiency, generally used in wire mesh product point (row) more prominent features on welder welding: fast and stable.

5、机身专用优质钢板优化力学结构整体美观，钢性好，电极加压机构一体化，气路短，结构紧凑，反应速度极快，安装维修方便。变压器漏磁小，内部水冷回路传热快，工作效率高，输出能力强。

5, high- steel body dedicated to optimize the overall appearance mechanical structure, steel is good, integrated electrode pressing mechanism, pneumatic short, compact, fast response, easy installation and maintenance. transformer magnetic flux leakage is small, internal water cooling loop heat fast, high efficiency, high output capability.

技术参数 technical parameters

可根据客户对工艺的要求定制各种焊接专机。welding machine can be customized according to customer's process re

本产品的品牌是火凤皇，型号是60/80/100/150KVA，Zui大焊接厚度是15+15（mm），电流是交流，动力形式是电动，控制方式是自动，频段是中频，驱动形式是气动，样式是立式，用途是焊接，作用原理是电阻焊接，作用对象是金属，焊接方式是压力式，焊接原理是对焊，加工精度是大功率，规格是60KVA,80KVA,100KVA,150KVA，工作形式是点焊，额定容量是60-80-100-150